Three Mistakes of fuel-efficient Renault CAN Clip

 Fuel-efficient Myth # 1
From the lower or raise the grade fuel can save money
In the refueling habit level, most likely to commit a misunderstanding  Renault CAN Clip own lower grade fuel. The car was originally used 93 gasoline and switch 90 oil for fuel-efficient look throughout the year will save the cost of around $ planted a huge hidden dangers. The commonly referred 90,93,97 gasoline label, on behalf of the the actual gasoline antiknock standard gasoline antiknock ratio. Old driver all know, the higher the compression ratio, the better the need gasoline knock resistance, the higher the label. If high compression ratio engine using low grade gasoline will produce detonation accelerate the aging of the parts, the failure rate is greatly increased. 
Low compression ratio engine insist on using high-grade oil, as originally 93 but with 97, it may appear "ignition delay" phenomenon, that pressure to the head is still not up to the self-ignition point, as there will be incomplete combustion phenomenon, the engine is not something good. Therefore, in order to save money or keep a car to decrease or increase the fuel grade are not desirable.
Fuel-efficient Myth # 2
At night or early morning refueling the best deal
Strictly speaking this is not a misunderstanding, but the cognitive error. Many people think that the night or early morning refueling would be more cost-effective. According to the principle of thermal expansion and contraction, a lower temperature at night, early morning gasoline volume is relatively small, so you can spend the same money of more oil. In fact, gas stations and oil storage pool in the ground and   BMW GT1  there is a protective layer, so the gasoline the temperature not dramatic changes with the outside temperature, which fuel the error is extremely small and can be ignored.
Fuel-efficient Myth # 3
Fuel-efficient or fuel-efficient fuel-efficient, stickers
The rise in oil prices has brought a degree of concern for fuel-efficient products, but in the newspaper prior to the survey, some still advertised nm, infrared, microwave, electromagnetic and other types of fuel-efficient or fuel-efficient eco-labels or even the name of paste products difficult to obtain the trust of almost entirely no effect, some claim that 30% of the fuel-efficient products. Therefore, the purchase of fuel-efficient products need to be carefully chosen. For more information, be sure to look for the authentic national certification standards and the recommendations of the service station, if there is no obvious   BMW GT1 DIS V57 SSS V41  symptoms of poor oil and too much coke, not too much.

Enhanced non-slip BMW GT1 when the emergency brake

The car's anti-lock braking system ABS refers to the BMW GT1 "Anti-LockBreakSystem", referred to as ABS. When the vehicle is in motion, if suddenly taken braking, easily the braking resistance exceeds the resistance between the tire and the ground, the wheels will Hugging the vehicle to lose steering ability even sideslip drift in snow or slippery pavement this The phenomenon is more evident. ABS brake by detecting the wheel speed and the vehicle speed is matched to determine if a tire is not locking, as based on the size of the control braking force, so that the adhesion between the wheels and the ground maximized to improve the braking manipulation properties. As a novice, how to use it properly?
ABS role
ABS role is simply to prevent vehicle tires locked emergency brake, the emergency brake to avoid loss of directional control and wheel skidding vehicles equipped with ABS in the dry asphalt, rain, snow and other road non-slip The performance is much higher than the vehicle is not equipped with ABS.
In recent years due to the growing importance of the automotive consumer safety, most of the cars have ABS as standard equipment. If no ABS, emergency braking is usually cause tire locking, then, rolling friction into sliding  BMW GT1 DIS V57 SSS V41  friction, the braking force is greatly decreased. And if the front wheels from locking, the vehicle lost steering capability; If the rear wheels before locking the vehicle prone to sliding, become unable to control the direction of traffic.
First, a correct understanding of ABS. Some media raised the ABS can greatly shorten the braking distance theory, which inevitably somewhat exaggerated. Sometimes even on a rough road, there the ABS running in sand or snow on the road may cause the braking distance is longer than the ABS of the vehicle is not installed. So equipped with ABS car driving do not be too casual with the car too close Shui Meng or force, and the lines are very dangerous.
Second, ABS system is not always to brake all work. It only approximates wheel from locking when work. Pay attention to their work is not quiet silence, slam the brake pedal at the same time if the ABS work will produce noise, also pulsating brake pedal arch foot repeatedly, do not worry, this is this system in automatically adjust the brake oil pressure is normal.
Again, a number used to open the old master driver habits without ABS car during emergency braking by the brake pedal back and forth a method to improve the braking effect, in such methods of operation are ABS car  Vas 5054a  has been automatically. This manipulation method is not only redundant, but also impede the normal work of the ABS system, but its performance greatly reduced. So always take brake with their feet to slam the brake pedal does not relax is correct.

Hub scratched the most effective treatment elm327

When the hub surface is difficult to remove  elm327 gent is often able to be gentle and effective removal of stains, reduce damage to the aluminum surface. In addition, the hub itself there is a layer of metal protection film, so special attention to cleaning Do not use paint brightener or other abrasive materials. Driving the process have to be careful to avoid rubs to the hub "Mishap" Once you have scratches or deformation, should its repair and re-paint treatment as soon as possible.
With scratches on how to repair?
Patched specific steps of six steps: the first step, check wounds, such as no injury to the inside of the wheel hub, can be simply repaired paint dilution, wipe scars around remove dirt; second step, scratches deepest part is difficult to remove the dirt, then can be used toothpicks to thoroughly clean; third step: in order to prevent mistakenly independent part of the painting, it is best to carefully tape posted on the scars around; fourth step collated hair tip coated with varnish shrink slightly after the paint dries, preferably coated slightly protruding; fifth step, after  BMW GT1 DIS V57 SSS V41 painting, to be completely dry probably take a week's time. After drying with waterproof paper dipped in soapy water, smear, smooth the surface; sixth step, struck a light with a mixture of grazed with a water-resistant paper, and then resort to waxing.

If they are deep scars, focus is observed that the metal surface is exposed, If you do not see the metal surface will not rust, can concentrate coated with a varnish. Nib little by little place up, and then wait for the paint is completely dry. To avoid this phenomenon, the car in the beginning when we must be diligent flushing rim, daily driving the vehicle at least once each week to wash once a rim, washed with water first wet sponge, then detergent scrub, and then flush with water.Day-to-day maintenance is also essential, naturally cooled When the hub high temperature, should be allowed before cleaning, do not use cold water to wash; otherwise impaired, will make aluminum wheels, and even the brake disc deformation and affect the braking effect. Cleaners on aluminum desk Kingland hub at high temperatures cause the hub surface chemical reactions, loss of luster, affect the appearance.
Stained hard to clear the tarmac when the hub, if the general cleaning agent to no avail, a brush, try to clear, but do not use excellent brush, particularly iron brush, so as not to damage the surface of the wheel hub. Experts a clear asphalt remedies: ie selection  Volvo Vida Dice Diagnostic Tool  of the medicinal active oil rubbed unexpected results can be obtained, and the owners have to give it a try. In addition, the vehicle location close to the waterfront, the hub should wash cleaning, to avoid salt corrosion on the aluminum surface.