Water injection tell you Digimaster 3 cool truth

 The so-called "water injection system, as the  Digimaster 3 name implies is water to the sprinklers spray into the interior of the engine, but a lot of people will have questions about, the water is sprayed into the engine in the end what's available? In fact, the purpose of water injection system is "cool". Is to determine one of the important factor of the performance of engine output, especially in supercharged vehicle is more important due to the intake air temperature, the water molecules gasification required energy for gasoline sixfold same environment launching cooling performance far greater than gasoline, therefore can take a lot of temperature, water injection after the atomized mist is sprayed into the cylinder, it is possible to effectively reduce the temperature in the cylinder, but after reducing the temperature, can effectively enhance the engine performance.

Push through the pressure of the  MB Star C3  pump, so that water can be fairly small molecules into the cylinder together with the gasoline combustion, because water is heavier than gasoline, so the water molecules within the sprayed into the cylinder will be gasoline wrap, not only increase gasoline combustion area, vaporizing the water molecules can take away the fever, and increased compression ratio, a lot of benefits.
   Water injection system in addition to lower engine operating temperature, effective control of the intake air temperature givers, there are many benefits, not only be able to absorb a lot of heat in the cylinder after installation, this way can also be effective in reducing the possibility of engine knock occurs, and for modified vehicles reduce the temperature and knock after the ignition is more advance or boost the value increases, for the performance of the output can be more directly. The lower the temperature of the combustion chamber, the temperature of the exhaust steam naturally will drop the exhaust pressure and the pressure of the turbine exhaust side of the turbo cars will also reduce, in addition to the water molecules are also clean coke is a good helper, the use of the engine  elm327  operation under high temperature steam driven intake manifold, valve and cylinder coke removal work, this is to install one of the benefits after the water jet.