Car care and maintenance of the cooling system

Car engine, gasoline 70% of the energy is wasted as heat, the industry has long been this in-depth investigation. It is reported that a car traveling on the highway, the heat dissipated by the cooling system is sufficient for two ordinary houses heating, automotive cooling system is very important.

1, the selection of the cooling water: the best selection of low hardness water, such as well water should be boiled to soften and then, it is best to use antifreeze.

2, pay attention to the state of the ministries technology: such as radiator leaks should be repaired, if the water pump, fan rotation swing or the occurrence of abnormal sound, timely repair. Found the engine overheating, check whether the lack of water, if the water shortage should be shut down. Let cool and add enough cooling water. If the thermostat is not working properly causing the engine temperature is too high and too low, should be promptly repaired or replaced.

Inspection and adjustment of the fan belt tightness: fan belt tight through the small, affects not only the amount of cooling air and make the engine work load was increased and accelerated wear of the belt slipping. If the belt tight through the large, will accelerate the water pump bearings, generator bearings wear. Therefore, in use, should be checked belt tightness necessary given adjustment. Such as non-compliance, can be adjusted by changing the position of the alternator and regulator arm.

4, periodic cleaning of scale: engine after a certain time, the scale will be deposited in the water tank and a radiator while the impact of heat, it should be regularly cleaned, the cleaning method is in Kühlsystem adding sufficient cleaning liquid, soak for some time after starting the engine after a certain period of time at low speed operation, hot release cleaning solution, then rinse with water.

Automotive cooling system, there are other important role. Automotive engine in a proper state of high temperature operating conditions best. If the engine is cold, it will speed up the wear of the components, so that the engine efficiency is reduced and emit more pollutants. Another important role of the cooling system is the engine warming up as soon as possible, and to maintain a constant temperature.

 http://elm327demi.blogspot.com/