Easily get the fun of DIY car Foil through five Autocom CDP Pro steps

Car brands and models on the market   Autocom CDP Pro today is more and more, the prices of movement slamming the hammer to fall, more and more private cars. The car is no doubt the owners of a home is their own private space. Foil to the car just as the home curtains can not only explosion-proof, sun, harmful UV rays, but also to protect our personal space. You buy a car yet? Old film of your car need to replace it? You want to experience the fun of a foil? Below, we teach you how to foil.

The first step: car wash, inside and outside of the car wash, drove to clean and dust-free place to wait for the film.

Step 2: the amount of window size, cut film, size by size must be appropriate, if the master is not allowed, the size can be slightly larger, but do not small.

The third step: cleaning the window glass. This step is important, because the glass residual dirt, even if only a  Autocom Cdp Pro 2012   little bit, can also affect the quality of the film. Be prepared in advance the two scraper, a hard scraper and a soft scraper (harness shop are sold). The glass on the water (water to put dish detergent), with a hard scraper the glass visibly soiled shave, then soft scraper and then the glass of water on the track cleanly. This repeated three or four times, until it is completely water clean. Sprayed with water completely cleaned glass windows, close the window, the car leaving only film.

Step Four: Foil. The tear film evenly sprayed with water in an effective membrane surface, tear off the plastic film on the side of the spare. Spray film surface affixed to the car glass fixed distance above the glass leaving a distance of 5-10mm if the film cut slightly larger, to avoid scratching the glass case the excess film is cut, and then take a soft scraper shave the water between the glass and the film. Order not to scratch the surface of the film, in the paste-good film surface and then sprayed with water, paste up Calibrating the film with a scraper to tear off the plastic film, plastic film torn off, the   Autocom Cdp Pro For Trucks entire film process is completed.

Step Five: deerskin water left window corner track to wipe clean.