How to use a vas 5054a with automatic transmission

Car equipped with an automatic transmission is not a complete stop, does not allow forward gears substitutions reverse gear, which is not be selected gear handle from the “D” bit to push l since bit, the car has been parked only in the confirmation stable after the above operations can be performed, otherwise it will cause damage to the internal clutch automatic transmission and brake. course, when the vehicle is not completely stopped, electricity shall handle the gear selecting from the “R” bit to pull the “D” bit.

For prevent hurry reversing, the hydraulic control circuit of the automatic transmission of certain cars equipped reverse gear restriction valve, if the automatic transmission when the vehicle speed is higher than 15 km /} l (i.e. the vehicle has not been parked), even when forcibly hanging down block can not be achieved, so as to play a protective role.

Equipped with an automatic transmission car parking and access to the garage, the selected block handle the accelerator pedal and the brake pedal repeat multiple operations prone to problems, attention should earnestly.

First, reversing warehousing creeping phenomenon of the car, do not step on the accelerator pedal, but the foot brake to control the vehicle moved slowly, and with the right of the steering wheel manipulation. Parking or storage in a narrow place, repeatedly advance and retreat of operation and repeatedly turn the steering wheel to keep their head organs sober, should not be misled step dinga accelerator pedal.

Second, we must move the car came to a complete stop before election gear lever.

Again, the vehicle is parked, stepping on the brake pedal to turn off, tighten the hand brake, and then selected gear handle pushed to the “r-bit. Need to keep in mind is that we must tighten r hand brake. And selected block handle onto the bit of “P”, the purpose of completing the parking of vehicles.
After learn this ,you can  check or fix your vehicle more fluent.