Details of xenon lights installation knowledge

1, HID system will produce a high voltage (23KV) device (Demolition) full attention. Device operation, please check the product before [the ballast group (Ballast), headlights (Bulb Kit) state, such as wire damage, drooling, terminals destruction, high-voltage wire leakage, immediately suspend operations.HID headlights with ballast (Ballast), Link Terminal, please do not arbitrarily change. Lighting will produce high voltage will cause dangerous bodywork leakage. 
3 Headlamp (Headlight) is lit or just after lights out, hands or skin Do not touch the car wash Do not hit the water directly. Headlamp (Headlight) will produce heat, may cause burns. * Car wash or touch near the headlights (Headlight) parts, please fully cool before operating. 
4, please be sure to check the position of the former light shaft (Beam axis), whether moderate and adjust, as appropriate. Brighter than normal halogen headlights (Halogen bulb), the system, such as the optical axis (Beam axis) does not regulate or deliberately so that the optical axis (Beam axis) facing up, may lead to an accident, please be sure to check adjustment. 
5 Do not look directly into the light is lit. Therefore cause eye pain or impaired vision, near Do not look directly into the lit. 
6 Please note that when the device (6.2 ~ 21V), and the positive and negative electrodes.7 device HID wiring group. 
8, device, pay special attention to the power of positive and negative electrodes are grounded pole, such as the car for the special specifications, the positive electrode is grounded, the ballast (Ballast) contact with the body will produce flashover phenomenon, when such vehicles device to be added equipped with a diode wiring group, otherwise it will be dangerous.